Checking The Information On Power Failure And Usage Times - Sony HSR-X216 Mode D'emploi

Maintenance
Checking the Information on
Power Failure and Usage Times
The main menu 5. POWER FAILURE /USED TIME
permits you to know whether interruption of recording
owing to a power failure.
You can also check the accumulated usage time(s) of
the built-in hard disk(s), the powered time of the
recorder, and the firmware version of the recorder.
1
Press the MENU button to display the main menu.
2
Select 5. POWER FAILURE /USED TIME.
The POWER FAILURE /USED TIME display
appears.
<POWER FAILURE/USED TIME>
POWER FAILURE
#002 FAILURE
RECOVER
USED TIME
DISK 1 USE : 00003H
DISK 2 USE : -----H
POWER
FIRMWARE : MAIN 1.00
POWER FAILURE
The occurrence time and the recovery time of the latest
power failure are displayed.
USED TIME
The accumulated usage time(s) of the built-in hard
disk(s) and the recorder are displayed.
FIRMWARE
The firmware version of the recorder is displayed.
To exit this menu, press the EXIT/OSD button.
78
(GB)
02-12 07:22
02-15 10:20
: 00358H
/ SUB 1.00