Connections For Data Storage; Memory Stick - Sony HSR-X216 Mode D'emploi

SUBNET MASK/GATEWAY/PORT: Set the values
according to the network to be connected.
ID/PASSWORD: Set the passwords for network
access (4 to 8 alphanumeric characters).
You can specify three levels of passwords, i.e. ID1,
ID2, and ID3, differing in operable functions.
ID1: Only monitoring the camera input and
playback images and stopping playback in
progress are allowed.
ID2: Operations related to playback and data
storage are allowed. Recording and menu
operations are not allowed.
ID3: All the operations using the buttons displayed
on the browser window are allowed.

Connections for Data Storage

Memory Stick

Inserting a commercially available PC card adaptor
into the PC card slot on the front panel enables data
copying to Memory Sticks.
HSR-X216/X209P/X216P
SHUTTLE
HOLD
Open the cover of the slot
by pressing the lower right
corner.
To format a Memory Stick
By formatting a memory card, you can erase all
previous data in a Memory Stick to use.
Use the copy set display for formatting.
1
Insert the Memory Stick to be formatted into the
PC card adaptor set in the PC card slot of this unit.
2
Set the unit to Still-Picture mode and press the
COPY button.
The copy set display is superimposed on the
image.
COPY TO : ARCHIVE AREA
HOW MANY :
START
FORMAT PC CARD
CHANGE WITH JOG, SET WITH SHUTTLE
3
Turn the Jog dial to highlight FORMAT PC
CARD, and turn the Shuttle dial clockwise.
A confirmation message appears.
PC card adaptor
Memory Stick
1 PICTURES
c
c
55
(GB)