Setting The Display Conditions - Sony HSR-X216 Mode D'emploi

Setting the Display Conditions

You can specify the various conditions of the screen
display of the monitor by selecting 4. SCREEN SET
from the main menu.
SCREEN SET display
<SCREEN SET>
1. MULTI SCREEN
MULTI SCREEN SET
2. SEQUENCE
SEQUENCE SET
3. MASK
MASK SET
Changing the position of pictures on a
divided screen
Specify the display position and the combination of
camera inputs to be displayed simultaneously in 4-
divison mode or the position of pictures on 9- or 16-
division mode with 1. MULTI SCREEN.
NORMAL: From the upper-left position to the
lower-right position camera pictures are displayed
in the order of camera number. Any position with
no camera input is displayed in gray.
CHANGE: The position for each camera input can
be set in the desired order.
Setting procedure:
1
Select CHANGE for 1. MULTI SCREEN, then
turn the Shuttle dial clockwise.
The cursor moves to the MULTI SCREEN SET
line.
2
Turn the Shuttle dial clockwise.
The QUAD POSITION SET MENU appears.
: NORMAL
c
: 1S
c
: OFF
c
<QUAD POSITION SET MENU>
DISPLAY : QUAD
QUAD1
01 02
I
03 04
I
--------------------
09 10
I
11 12
I
QUAD3
CHECK THE SCREEN
Each time you turn the Jog dial, the display
changes among the MULTI 16 POSITION SET
MENU (HSR-X216/X216P only), MULTI 9
POSITION SET MENU, and QUAD POSITION
SET MENU.
3
Select the MENU display to be specified, then turn
the Shuttle dial clockwise.
4
On the QUAD POSITION SET MENU, specify
the 3 combinations (HSR-X209P) or 4
combinations (HSR-X216/X216P) of 4 camera
inputs to be switched by the QUAD button by
entering the desired camera numbers for the 4 tiled
picture positions.
On the MULTI 9 POSITION SET MENU,
specify the desired camera number for each of the
9 tiled picture positions.
On the MULTI 16 POSITION SET MENU,
(HSR-X216/X216P only), specify the desired
camera number for each of the 16 tiled picture
positions.
MULTI 16 POSITION SET MENU
<MULTI 16 POSITION SET MENU>
DISPLAY : MULTI 16
01 02
05 06
09 10
13 14
CHECK THE SCREEN
1) Turn the Jog dial to move the cursor to one of
the picture positions, then turn the Shuttle dial
clockwise so that the camera number presently
set flashes.
QUAD2
05 06
07 08
13 14
15 16
QUAD4
c
03 04
07 08
11 12
15 16
c
23
(GB)