On-Screen Data - Sony HSR-X216 Mode D'emploi

Locations and Functions of Parts

On-Screen Data

1 Operation status
REC ALARM 0000 REPEAT HI A
5 Remaining of recording area
4 Alarm count
3 Alarm type
By pressing the EXIT/OSD button on the front panel,
you can change the display position or even make
them disappear.
Items 3 to 9 can be independently turned on/off with
a menu operation
1 Operation status
The current operation mode is displayed.
REC: Recording
B: Playback in the forward direction
b: Playback in the reverse direction
X: Still
M: High-speed playback in the forward direction
m: High-speed playback in the reverse direction
C: Slow-motion playback in the forward direction
c: Slow-motion playback in the reverse direction
Note
When recording and playback are both in progress,
only B is displayed.
2 Channel (camera) number
The camera number being selected is displayed.
When an alarm is generated, "EA (external alarm)" or
"SA (sensor alarm)" flashes at the left of the number.
3 Alarm type
The active alarm type is displayed.
ALARM: Alarm recording
PRE: Pre-alarm recording
14
(GB)
2 Channel number
02
03-01-01 00:00:00
9 Time
8 Date
7 Audio recording
6 Picture quality
4 Alarm count
Each time alarm recording is made, the value is
increased by one.
The value will return to 1 if it exceeds 9999.
5 Remaining of recording area
When the recording area OVERWRITE function is set
to OFF with the RECORDING CONDITIONS SET
menu , the remaining capacity of the
(page 64(GB))
recording area is displayed (in %).
6 Picture quality
In a recording mode or stop status, the picture quality
and recording cycle specified for normal recording are
displayed.
In playback, the picture quality and recording cycle
when the recording has made are displayed.
7 Audio recording
During audio recording, "A" is displayed.
8 Date/9 Time
In a recording mode or stop status (monitoring the
camera input), the current date (month-day-year on the
HSR-X216 or day-month-year on the HSR-X209P/
X216P) and time (hour:min:sec) are displayed.
In playback, the date and time when the recording has
made are displayed.
Disk error indication
If an error has occurred on a hard disk, one of the
following error message will appear at the center of the
screen:
DISK ERROR: An error has occurred, but it cannot
be determined on which of the two disks it has
occurred.
DISK ERROR(1): An error has occurred on DISK1
(MASTER).
DISK ERROR(2): An error has occurred on DISK2
(SLAVE).
DISK ERROR(1->2): An error has occurred on
DISK1 then on DISK2.
DISK ERROR(2->1): An error has occurred on
DISK2 then on DISK1.