Beko RDNE505E20DZXP Manuel D'utilisation page 38

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
The cooler temperature is very
low, but the freezer temperature is
adequate.
• The cooler compartment temperature is set
to a very low degree. >>> Set the freezer
compartment temperature to a higher degree
and check again.
The food items kept in cooler
compartment drawers are frozen.
• The cooler compartment temperature is set
to a very low degree. >>> Set the freezer
compartment temperature to a higher degree
and check again.
The temperature in the cooler or the
freezer is too high.
• The cooler compartment temperature is set to
a very high degree. >>> Temperature setting
of the cooler compartment has an effect on the
temperature in the freezer compartment. Wait
until the temperature of relevant parts reach the
sufficient level by changing the temperature of
cooler or freezer compartments.
• The doors were opened frequently or kept open
for long periods. >>> Do not open the doors too
frequently.
• The door may be ajar. >>> Fully close the door.
• The product may have been recently plugged in
or a new food item is placed inside. >>> This is
normal. The product will take longer to reach the
set temperature when recently plugged in or a
new food item is placed inside.
• Large quantities of hot food may have been
recently placed into the product. >>> Do not
place hot food into the product.
Shaking or noise.
• The ground is not level or durable. >>> If the
product is shaking when moved slowly, adjust
the stands to balance the product. Also make
sure the ground is sufficiently durable to bear
the product.
• Any items placed on the product may cause
noise. >>> Remove any items placed on the
product.
Refrigerator / User Manual
The product is making noise of liquid
flowing, spraying etc.
• The product's operating principles involve liquid
and gas flows. >>> This is normal and not a
malfunction.
There is sound of wind blowing
coming from the product.
• The product uses a fan for the cooling process.
This is normal and not a malfunction.
There is condensation on the
product's internal walls.
• Hot or humid weather will increase icing
and condensation. This is normal and not a
malfunction.
• The doors were opened frequently or kept open
for long periods. >>> Do not open the doors too
frequently; if open, close the door.
• The door may be ajar. >>> Fully close the door.
There is condensation on the
product's exterior or between the
doors.
• The ambient weather may be humid, this is
quite normal in humid weather. >>> The
condensation will dissipate when the humidity is
reduced.
The interior smells bad.
• The product is not cleaned regularly. >>> Clean
the interior regularly using sponge, warm water
and carbonated water.
• Certain holders and packaging materials may
cause odour. >>> Use holders and packaging
materials without free of odour.
• The foods were placed in unsealed holders.
>>> Keep the foods in sealed holders. Micro-
organisms may spread out of unsealed food
items and cause malodour. Remove any expired
or spoilt foods from the product.
The door is not closing.
• Food packages may be blocking the door. >>>
Relocate any items blocking the doors.
• The product is not standing in full upright
position on the ground. >>> Adjust the stands
to balance the product.
37/38EN

Publicité

Table des Matières
loading

Table des Matières