Beko RDNE505E20DZXP Manuel D'utilisation page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating the product
Energy saving function is activated
during delivery from factory and
cannot be canceled.
3.Quick fridge function
The button has two functions. To
activate or deactivate the quick cool
function press it briefly. Quick Cool
indicator will turn off and the product
will return to its normal settings. (
C
Use quick cooling function
when you want to quickly cool
the food placed in the fridge
compartment. If you want to
cool large amounts of fresh
food, activate this function
before putting the food into
the product.
C
If you do not cancel it, quick
cooling will cancel itself
automatically after 8 hours or
when the fridge compartment
reaches to the required
temperature.
C
If you press the quick cooling
button repeatedly with short
intervals, the electronic circuit
protection will be activated
and the compressor will not
start up immediately.
C
This function is not recalled
when power restores after a
power failure.
4. Fridge compartment temperature
setting button
Press this button to set the
temperature of the fridge
compartment to 8, 7,6, 5,4,3, 2, 8...
respectively. Press this button to set
the fridge compartment temperature
to the desired value. (
5.Vacation Function
In order to activate vacation function,
press the this button (
seconds, and the vacation mode
indicator (
the vacation function is activated,
"- -" is displayed on the fridge
compartment temperature indicator
)
and no active cooling is performed
on the fridge compartment. It is not
suitable to keep the food in the fridge
compartment when this function is
activated. Other compartments shall
be continued to be cooled as per their
set temperature.
To cancel this function press Vacation
function button again.
6. Alarm off warning:
In case of power failure/high
temperature alarm, after checking
the food located in the freezer
compartment press the alarm off
button ( ) to clear the warning.
7. Key lock
Press key lock button (
simultaneously for 3 seconds. Key
lock symbol
( ) will light up and key lock mode
will be activated. Buttons will
not function if the Key lock mode
is active. Press key lock button
simultaneously for 3 seconds again.
Key lock symbol will turn off and the
key lock mode will be exited.
Press the key lock button if you
want to prevent changing of
the temperature setting of the
refrigerator (
)
18 / 38 EN
) for 3
) will be activated. When
)
).
Refrigerator / User Manual

Publicité

Table des Matières
loading

Table des Matières