Panasonic CS-Z7SKEW Comment Utiliser L'appareil page 12

How to use
To switch between
powerful & quiet
(Remote control display)
POWERFUL
QUIET
POWERFUL: To reach temperature quickly
• This operation stops automatically after
20 minutes.
QUIET: To enjoy quiet operation
• This operation reduces airfl ow noise.
To select operation mode
MODE
AUTO mode - For your convenience
• During operation mode selection, the power
indicator will blinks at initial.
• Unit selects operation mode every 3 hours
Multi
according to setting temperature, outdoor
temperature and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power
indicator will blinks at initial during this operation.
COOL mode - To enjoy cool air
• To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
To maximise comfort while
SLEEP
sleeping
(CANCEL)
• This operation provides you with a comfortable
environment while sleeping. It will automatically
adjust the sleep pattern temperature during the
activation period.
• The indoor unit indicator will dim when this
operation is activated. This is not applicable if the
indicator brightness has been manually dimmed.
• This operation is incorporated with the activation
timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with single
timer or twin timer. Sleep operation has the
priority over OFF timer.
• This operation can be cancelled by pressing the
respective button when the sleep timer reaches 0.0h.
To adjust horizontal
airfl ow direction
• Manually
adjustable.
( CS-TZ9SKEW,
CS-TZ12SKEW,
CS-TZ15SKEW,
CS-TZ18SKEW,
CS-MTZ5SKE,
CS-MTZ7SKE)
12
For TZ, MTZ indoor unit
(NORMAL)
Auto OFF/ON button
Press and hold for
approximately
10 seconds to show
temperature setting
in °C or °F.
OFF/ON OFF/ON OFF/ON
FAN SPEED
MODE AIR SWING
TEMP TEMP
SLEEP
ON ON SET SET
TIMER TIMER
OFF OFF CANCEL CANCEL
Not used
in normal
operations.
CS-TZ9SKEW
CS-TZ12SKEW
CS-TZ15SKEW
CS-TZ18SKEW
CS-MTZ5SKE
CS-MTZ7SKE
Use when remote control is misplaced or a
malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the
button until 1 beep is heard, then release.
• To use in HEAT mode, press and hold the
button until 1 beep is heard, then release. And
press again until 2 beeps, then release.
• Press the button again to turn off.
Multi split system
Multi
Remote control receiver
and indicator
(Green)
POWER
(Orange)
TIMER
Remote control display
OFF/ON OFF/ON OFF/ON
FAN SPEED
MODE
TEMP TEMP AIR SWING
SLEEP
ON ON SET SET
TIMER TIMER
OFF OFF CANCEL CANCEL
Press to restore the
remote control to default
setting.
Press and hold for
approximately 5 seconds
to show 12-hour (am/pm)
or 24-hour time indication.
CS-TZ24SKEW