Dubbing (Copy From Tape ! To Tape @ ) - Teac GF-680 Manuel Du Propriétaire

1 Load a pre-recorded cassette tape into TAPE
recordable cassette tape into TAPE
< You can use normal (Type ) tape only.
!
2
Press the TAPE button or the FUNCTION button to select
"TAPE".
3 Select the dubbing speed by pressing the DUB SPEED button.
high:
Dubbing is performed at high speed.
(You may lose some fidelity during high speed dubbing.
Make a trial recording to verify the audio quality.)
normal:
Dubbing is performed at normal speed.
Dubbing (Copy from TAPE I to TAPE II)
3 2
4 1 4
! and a
.
@
5
4 Press the PAUSE button and the RECORD button of TAPE
5 Press the PLAY button of TAPE
The dubbing starts.
< Do not select another source during dubbing, or the dubbing
will be interrupted.
< To stop dubbing, press the STOP buttons of TAPE
@ .
.
!
and .
! @
25