Listening To Cds - Teac GF-680 Manuel Du Propriétaire

1
Press the CD button (or the FUNCTION button of the remote
control unit) to select "CD".
2 Press the OPEN/CLOSE button.
3 Place a disc on a tray with the printed label face up.
carousel
disc number
< Never place more than one disc on a tray.
< To place a disc on the hidden tray, press the DISC SKIP button.
< Do not touch the carousel while it is rotating.
16

Listening to CDs

3
4
Press the OPEN/CLOSE button to close the tray.
< It takes a few seconds for the unit to load the disc. No buttons
will work during loading. Wait until the total number of the
tracks and the total play time of the disc are displayed.
< When no disc is set, "NO DISC" blinks.
5 If you want to select other disc, press the corresponding
button (DISC 1, 2 or 3) or the DISC SKIP button.
Playback starts automatically.
tray
6 Press the PLAY/PAUSE button to start playback.
Playback starts from the first track of the selected disc.
When the playback of all the discs has finished, the unit stops
automatically.
5
6
1
2 4
DISC SKIP
CH INTRO REPEAT SHUFFLE REMAIN
TRACK MEMORY AUX TAPE TUNER CD
TIMER
CLASSIC
ON OFF
ROCK
STEREO
POPS
3
FLAT
MHz
1 2
PLAY
kHz