Extended Playback; Recording - Teac GF-680 Manuel Du Propriétaire

Extended Playback

4 2 4
1 Press the TAPE button or the FUNCTION button to select
"TAPE" .
2 Load cassette tapes into TAPE
3 Press the PLAY button of TAPE
4 Press the PAUSE and the PLAY button of TAPE
When TAPE ! stops, TAPE
When TAPE stops, the extended playback ends.
@
24
1
3 2
TAPE TAPE
@ !
and TAPE .
! @
.
!
.
@
@ starts playback automatically.
Recording (TAPE II only)
3
STOP/EJECT
1 Load a recordable cassette tape into TAPE
< You can use normal (Type
< If the safety tabs of the cassette tape have been broken off,
cover the holes with adhesive tape.
2 Select the source to be recorded by pressing the
corresponding button.
< Do not select TAPE.
< Prepare the source to be recorded. When you select "TUNER",
tune in a station.
3 Press the RECORD button to start recording.
< When you select "CD", the playback of CD starts
simultaneously.
< To stop recording temporarily, press the PAUSE button. To
restart the tape, press the PAUSE button again.
< To stop recording, press the STOP button.
CD Synchronous Recording
1. Load a recordable cassette tape into TAPE
2. Press the CD button or the FUNCTION button to select "CD".
3. Select a disc to be recorded by pressing the corresponding
button (DISC 1, 2 or 3) or the DISC SKIP button.
< You can program tracks to be recorded.
4. Press the RECORD button to start recording.
The playback of CD starts simultaneously.
< To stop recording, press the STOP button.
1 2
PAUSE
.
@
! ) tape only.
When the RECORD button is
pressed, the PLAY button is also
pressed down automatically.
@ .