Listening To The Radio - Teac GF-680 Manuel Du Propriétaire

1
Select "TUNER" by pressing the TUNER(BAND) button or the
FUNCTION button.
2 Select AM or FM by pressing the TUNER(BAND) button.
3
Select the station you want to listen to (auto selection).
Hold the TUNING knob up or down until the frequency display
begins to change. When a station is tuned in, the tuning
process will stop automatically.
< Tap the TUNING knob to stop the auto selection.
Selecting stations which cannot be tuned automatically
(manual selection)
When the TUNING knob is tapped momentarily, the frequency
changes by a fixed step.
Tap the TUNING knob up or down repeatedly until the station
you want to listen to is found.

Listening to the Radio

FM MODE
3
1 2
FM MODE button
Pressing this button alternates between Stereo mode and
Mono mode.
Stereo:
FM stereo broadcasts are received in stereo and the "STEREO"
indicator will light.
Mono:
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced monaural, reducing
unwanted noise.
If the reception is poor
AM broadcast:
The AM antenna is built within the cabinet. Reposition the unit
to find the best position for AM stations.
FM broadcast:
Reposition the FM antenna until you get the best reception.
21