Gallagher M5000i Notice D'installation page 15

Gallagher 3E4752 M5000i Energizer User Manual
Using The Energizer Controller
Energizer Output and Alarms
The energizer output is the default screen display mode. The zone indicator arrow
is highligh ng the energizer zone (
this case.
The quickscan bargraph display is also indica ng an output voltage of over 7KV.
Voltage Alarm
If the energizer output voltage falls below the alarm level (default 3KV) then the
status LED will fl ash red and the energizer zone indicator will become highlighted.
Status LED
fl ashes red
) and the energizer output voltage is 9.0KV in
Controller showing the energizer opera ng normally
Controller showing the energizer in output alarm
15