Setting Surface Controls; Hot Surface Indicator; Using The Cooking Elements - LG LSE4617 Série Manuel Du Propriétaire

Setting Surface Controls

• Cooking Element LED Bar
The range provides an LED bar for each cooking
element on the cooktop. Check messages in
the display window and use the LEDs with the
corresponding control knobs to monitor the power
levels of the elements.
Lo
Simmer
3
4
MED
6
7
8
HI
Boost
• available Power Level Settings
The cooktop control's LED bar displays the
element's power level settings, ranging from Lo to
Hi to Boost. Adjust the settings in increments of
one, from Lo (Level 1) to Boost (Level 10).
To select Hi, turn the knob clockwise, through level
8 to Hi/Boost.
• Boost Power Level
To activate the Boost mode, turn the knob directly
from Off to Boost. Boost mode is only available
immediately after activating a cooking element.
When the cooking element is set to the Boost
mode, the LED bar flashes and the Boost mode
stays in operation for up to 10 minutes. After 10
minutes, the cooking element automatically returns
to the Hi setting.
HI/Boost
The maximum operating time for all element levels
except the Boost mode is 12 hours.

Hot Surface Indicator

The hot surface indicator light glows as long as any
surface cooking area is too hot to touch.
It remains on after the element is turned off and until
the surface has cooled to approximately 130 °F.
It is normal for the surface elements to cycle on and
off when cooking at lower temperature settings.
Simmer

Using the Cooking Elements

CaUTION
Before Cooking
• Do not place or store flammable or heat-
sensitive items on the induction cooktop, even
when the cooktop is not in use.
• Place cookware on the cooking elements
before turning on the induction cooktop.
• Do not place sealed containers on the cooktop.
During Cooking
• Do not place metallic objects such as knives,
forks, spoons, and lids on the induction cooktop
surface; they can get hot.
• Use this appliance only for normal household
use. It is not designed for commercial or
industrial use.
• Never use the appliance to heat the room.
• Use caution when plugging electrical appliances
into power outlets near the cooktop. Keep
power cords from any contact with the cooktop
or cookware.
• Overheated fat and oil can catch fire quickly.
Never leave surface elements unattended when
frying foods.
• Do not use the induction cooktop to heat
aluminum foil, products wrapped in aluminum
foil , or frozen foods packaged in aluminum
cookware.
• Use caution when plugging electrical appliances
into outlets near the cooktop to keep power
cords away from the hot cooktop or cookware.
• Users with pacemakers and active heart
implants must keep their upper body at a
minimum distance of 1 ft (30 cm) from active
induction cooking elements. If in doubt, consult
the implant manufacturer or your doctor.
after Cooking
• After use, switch off the induction cooking
element using its control. Do not rely on the pan
sensor.
OPERATION 27