Husqvarna 525L Manuel D'utilisation page 21

Trouble shooting
Starting failure
Check
Stop button
Starter pawls
Fuel tank
Carburetor
Sparking (no spark)
Spark plug
Fuel filter
Engine starts but does not keep
running.
Check
Fuel tank
Carburetor
Air filter
Fuel filter
MAINTENANCE
Possible Cause
Stop position
Binding pawls
Incorrect fuel type
Adjustment of the idle speed
Spark plug contaminated or wet
Spark plug gap incorrect.
Spark plug loose.
Clogged fuel filter
Possible Cause
Incorrect fuel type
Engine will not idle properly.
Clogged air filter
Clogged fuel filter
Action
Set the stop switch to the start
position.
Adjust or replace the pawls.
Clean around the pawls.
Contact a servicing dealer.
Drain it and use correct fuel.
Adjust the idling speed with the T-
screw.
Make sure that the spark plug is dry
and clean.
Clean the spark plug. Check that the
electrode gap is correct. Make sure
that the spark plug is fitted with a
suppressor.
Refer to technical data for correct
electrode gap.
Retighten the spark plug
Replace the fuel filter.
Possible action
Drain it and use correct fuel.
Contact your servicing dealer.
Clean the air filter.
Replace the fuel filter.
English – 21