Commissioning, Operation - WIKA TF43 Mode D'emploi

5. Transport, packaging ... / 6. Commissioning, operation
WARNING!
Before storing the instrument (following operation), remove any residual media. This
is of particular importance if the medium is hazardous to health, e.g. caustic, toxic,
carcinogenic, radioactive, etc.

6. Commissioning, operation

6.1 Mounting
Assembly of the insertion thermometer has to be performed in such a way that the permissible
operating temperature (environment, medium) is neither exceeded nor undercut considering
convection and thermal radiation.
6.2 Electrical connection
WARNING!
Only connect with power disconnected!
Cables and wires
Leads with bare ends must be finished with end splices.
■
Cables used must comply with the respective requirements in terms of stability and
■
temperature
Connecting cables must be run so that any mechanical damage is prevented
■
6.3 Pin assignment
2-wire
connection
4-wire
connection
WIKA operating instructions model TF43
black
white
red
red
white
white
EN
9