Changing Operation Mode; Changing Between Fahrenheit And Celsius; Resetting The Software - Hatco IRNG Série Manuel D'installation Et D'utilisation

OPERATION
6. Turn the Control Knob until BKSP is highlighted in red,
then push the Control Knob until all text in the name field is
deleted.
7. Turn the Control Knob until the first
letter for the menu item name is
highlighted in red, then press the
Control Knob to select the letter.
• Continue selecting letters using
the Control Knob until the name
is complete.
8. Turn the Control Knob until SAVE is highlighted in red, then
push the Control Knob to save the menu item name.
• The Menu Item screen will appear.
9. Program the Menu Item.
a. Turn the Control Knob until
either POWER1 or TEMP1 is
highlighted in red, depending
on the cooking control method.
Push the Control Knob to select
the cooking control method.
b. Turn the Control knob until the desired value appears for
the cooking control method. Push the Control Knob to
save the value.
c. Turn the Control Knob until TIMER 1 is highlighted in red.
Push the Control Knob to select TIMER 1.
d. Turn the Control knob until the desired value appears for
the timer. Push the Control Knob to save the value.
e. If a second stage is needed for the menu item, repeat
steps a–d for POWER2/TEMP2 and TIMER2.
f. When menu item programming is complete, turn the
Control Knob until SAVE is highlighted in red, then push
the Control Knob to save the menu item.
g. The Program screen will appear. If all menu item
programming is complete, turn the Control Knob until
EXIT is highlighted in red, then push the Control Knob to
return to the Settings screen. Touch the
control panel to return to the active cooking control screen.

Changing Operation Mode

Use the following procedure to change the operation mode of
the Induction Range. Two modes are available: Standard Mode
and Advanced Programming Mode.
1. Push the Control Knob to start the
Induction Range.
2. Touch the Button on the control
panel to toggle through the screens
on the Control Display to the
Settings Screen.
3. Turn the Control Knob clockwise
until MODES is highlighted in red, then push the Control
Knob to select MODES.
• A password screen will appear.
• To enter the 3-digit password
"248", turn the Control Knob to
the first number, then press the
Control Knob to select and move
to the next number.
• The Modes screen will appear.
Name field blank.
BKSP SAVE
Name—Advanced
RICE SAVE

Changing Between Fahrenheit and Celsius

Menu Item—Advanced
Use the following procedure to change the temperature unit
of measure between Fahrenheit and Celsius in Advanced
Programming Mode.
Button on the
Settings
Firmware Errors
Modes
Showroom

Resetting the Software

Settings—Standard
Use the following procedure if the induction range is
unresponsive and the Control Display appears "frozen."
14
4. Turn the Control Knob to highlight either MODE S or MODE
A-ß in red, then push the Control Knob to select the desired
mode.
• MODE S = Standard Mode
• MODE A-ß = Advanced Programming Mode
• After selecting the mode, the Control Display will return
to the Power Control screen.
Temperature Control units
separate in Standard Mode.
Standard Mode
1. Push the Control Knob to start the
Induction Range.
2. Touch the Button on the control
panel to toggle through the screens
on the Control Display to the
Settings Screen.
3. Turn the Control Knob clockwise
until TEMP UNIT is highlighted in red, then push the Control
Knob to select TEMP UNIT.
• A password screen will appear.
• To enter the 3-digit password
"248", turn the Control Knob to
the first number, then press the
Control Knob to select and move
to the next number.
• The Temp Unit screen will appear.
4. Turn the Control Knob until the desired unit of measure is
highlighted in red, then push the Control Knob to select the
unit of measure.
5. Turn the Control Knob to highlight EXIT, then push the
Control Knob to return to the Settings Screen.
6. Touch the Button on the control panel to return to the
active cooking control screen.
1. Touch and hold both the
the same time for 10 seconds.
• The unit will restart and the Welcome screen will appear
on the Control Display.
English
Menu screen appears in
Advanced Programming Mode.
Advanced Programming
Mode
Settings
Firmware Errors
Modes Temp Unit
Showroom Program
Settings—Advanced
Button and the Button at
Form No. IRNGM-1120