Quick Starting Guide - GE VAT300 Guide Rapide

g
AC SPEED CONTROL EQUIPMENT
This is a short form manual intended to provide the minimum information for a quick
drive installation and test operation. The manual only describes limited information on
V/f control normally used for a basic operation.
For further sophisticated functions of the drive, please refer to the VAT300 Instruction
Manual No. PCST-3450 found on the CD-ROM supplied with the drive. It is strongly
advisable to read the Instruction Manual No. PCST-3450 thoroughly, as it contains
essential technical and safety information.
"WARNING – Operation of this equipment requires detailed installation and
operation instructions provided in the Installation/Operation manual intended for
use with this product. This information is provided on the CD-ROM included in the
container this device was packaged in. It should be retained with this device at all
times. A hard copy of this information may be ordered to GE Dealer
PCST-3449A
VAT300
200V System 0.75 to 45kW Normal Duty
400V System 0.75 to 475kW Normal Duty

QUICK STARTING GUIDE

GE Consumer & Industrial
GE Consumer & Industrial
GE
EN-1
Jan.2008