Christopeit Sport X1 Bike Notice De Montage Et D'utilisation page 19

Step 5:
Installation of saddle (16) and saddle support (4).
1. Place the saddle (16) with the seat surface downwards.
2. Place the retaining plate of the saddle support (4) on the upwards
pointing bottom of the saddle (16). The threaded pieces on the
bottom of the saddle must project through the corresponding
holes in the retaining plate of the saddle support (4).
3. Place washers (20) on the threaded pieces, screw on nuts (21)
and tighten firmly.
4. Insert the saddle support (4) into the provided holder of the main
frame (1) and secure at the desired position by screwing in the
saddle support screw (17).
(Note: To screw in the saddle support screw (17), the threaded
hole in the main frame (1) and one of the holes in the saddle
support (4) must be aligned. Furthermore, ensure that the saddle
support (4) is not pulled out of the main frame beyond the marked
maximum adjustment position. The setting of the saddle support
can be adjust as desired later.)
Step 6:
Checks
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the machine
at a low resistance setting and make your individual adjustments.
Fold up function:
1. Fold up X1 bike by pushing the seat and mainframe together for
storage.
For use, fold down completely and ensure a safe stand.
Note:
Please keep the tool set and the instructions in a safe place as these
may be required for repairs or spare parts orders becoming ne-
cessary later.
19