Specifications - Sony HT-SL7 Mode D'emploi

The remote does not function.
• Point the remote at the remote sensor
receiver.
• Remove any obstacles in the path between the
remote and the receiver.
• Replace both batteries in the remote with new
ones, if they are weak.
• Make sure you select the correct function on the
remote.
• If the remote is set to operate the TV only, use
the remote to select a source or component other
than TV before operating the receiver or other
component.
Reference sections for clearing the
receiver's memory
To clear
All memorized settings
Customized sound fields

Specifications

Amplifier section
POWER OUTPUT
Rated Power Output at Stereo mode
(8 ohms 1 kHz, THD 0.3 %)
Reference Power Output
(THD 0.3 %)
1) Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
MICRO SP.:
NORMAL SP.:
Inputs (Analog)
2) INPUT SHORT.
3) Weighted network, input level.
on the
See
page 13
page 23
80 W + 80 W
1)
Front : 80 W/ch
1)
Center : 80 W
1)
Surround : 80 W/ch
150 Hz – 20 kHz
0/–3 dB
150 Hz (6 dB/oct)
Low cut Filter ON
20 Hz – 20 kHz
+/–0.5 dB
Sensitivity: 250 mV
Impedance: 50 kilohms
2)
S/N : 80 dB
(A, 20 kHz LPF,
3)
250 mV )
Inputs (Digital)
DVD (Coaxial)
TV, AUX (Optical)
Outputs
FRONT L/R, CENTER, SURROUND L/R,
SUB WOOFER
Video section
Inputs
S-video:
Outputs
S-video:
FM tuner section
Tuning range
Antenna terminals
Intermediate frequency
Sensitivity
Usable sensitivity
S/N
Harmonic distortion at 1 kHz
Separation
Frequency response
Selectivity
Sensitivity: –
Impedance: 75 ohms
S/N: 96 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 96 dB
(A, 20 kHz LPF)
Voltage: 2 V
Impedance: 1 kilohms
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
87.5 – 108.0 MHz
75 ohms, unbalanced
10.7 MHz
Mono: 18.3 dBf,
2.2 µV/75 ohms
Stereo: 38.3 dBf,
22.5 µV/75 ohms
11.2 dBf, 1 µV/75 ohms
Mono: 76 dB
Stereo: 70 dB
Mono: 0.3%
Stereo: 0.5%
45 dB at 1 kHz
30 Hz – 15 kHz
+0.5/–2 dB
60 dB at 400 kHz
continued
GB
29