Cancel A One-Time Temporary Basal Rate; Create A Temporary Basal Preset - OmniPod CAT45E Guide De L'utilisateur

Cancel a one-time temporary basal rate

1. On the Home screen, use the Up/Down Controller buttons
to choose Suspend/cancel, then press Select.
2. Choose Cancel temp basal (Figure 3-13), then press Select.
Figure 3-13
3. Press Confirm to cancel the temporary basal shown on the
screen.
Understanding and Adjusting Basal Rates

Create a temporary basal preset

1. On the Home screen, use the Up/Down Controller buttons
to choose Settings, then press Select.
2. Choose Presets, then press Select.
3. Choose Temp basal presets, then press Select.
4. Choose [add new], then press New.
5. To use the OmniPod System's default naming system, simply
press Next. The default naming system automatically assigns
program names in numerical order, such as temp basal 1,
temp basal 2, temp basal 3.
Or, to give a different name to the program:
a. Press the Up/Down Controller buttons to scroll through
the list of characters. An up-and-down arrow symbol on
the screen indicates the character you are changing.
b. Press the middle Soft Key to move the underscore to the
next character.
c. Enter each character one at a time. For example, if you take
an aerobics class two nights a week, you might enter A, e, r,
o, b, i, c, s (Figure 3-14). (A blank character or space is the
first and last option in the scrolling menu.)
Capitals and lowercase letters are considered
the same.
3
25