Publicité
Les langues disponibles
Les langues disponibles
Tuning
Press the
TUNE- or
to this station in few seconds.
Storing DAB Presets
You can save up to 20 DAB stations.
1. Tune to the station you wish to store.
2. Press and hold the PRESET button. Flashing preset channel number will be displayed.
3. Press the
TUNE- or
save.
Recall DAB Presets
1. Press the PRESET button. Steady preset channel number will be displayed.
2. Press the
TUNE- or
tune to the preset channel.
Displaying DAB Station Information
There are several types of information as listed below. To change the display information, press the INFO button
repeatedly.
1. Radio Text scrolling
Comprises music titles or programme details provided by the broadcaster.
2. Program Type (PTY)
Type of programme provided by the broadcaster.
3. Multiplex Name
Displays name of multiplex to which the current station belongs.
4. Channel and Frequency
Channel number and frequency.
5. Audio Bit Rate
This is the current channel audio bat rate.
6. Signal Error Rate
It shows the error received. The larger this value the more the error received. To improve the reception adjust the
antenna position.
7. Time and Date
The real time and current date provided by the broadcaster.
OTHER DAB MENU OPERATIONS
Press the MENU button to access the menu control. Then press the
described below.
Dynamic Range Control (DRC)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast
is set by the broadcaster and transmitted with the service. Changing the DRC value on your unit enables you to apply a
scaling factor to this level.
There are three levels of compression:
DRC High:
DRC Low:
DRC Off:
1. Press the MENU button to access the menu control.
2. Press the
TUNE- or
3. Press the
TUNE- or
4. Press the MENU button to exit the menu control.
Note:
- Not all DAB broadcasts are able to use DRC function. If the broadcast does not support DRC then the DRC setting in
the unit will have no effect.
- After you have adjusted the DRC level the sound may be louder.
Prune
This function removes inactive stations.
1. Press MENU button to access the menu control.
2. Press the
TUNE- or
3. Press the MENU button to exit the menu control.
TUNE+ button to display the information of the next station. Then press the ENTER button to tune
TUNE+ button to a preset number that you want to store. Then press the ENTER button to
TUNE+ button to a preset number that you want to recall. Then press the ENTER button to
Maximum compression as sent with the transmitted service
Set to 1/2 that of the sent transmitted service
No compression
TUNE+ button until "DRC" is displayed and then press the ENTER button.
TUNE+ button to select the DRC value and then press the ENTER to confirm.
TUNE+ button until "Prune" is displayed and then press the ENTER button to prune the unit.
TUNE- or
11
TUNE+ button for different options as
Publicité
