Controlling A Cd Changer From The Md Deck (Mega Cd Control Function) - Sony MiniDisc Deck MDS-JA20ES Mode D'emploi

When using the coaxial digital connecting cable
MD deck
DIGITAL IN
DIGITAL OUT
COAXIAL OPT1 OPT2 COAXIAL OPTICAL
Ç
: Signal flow
ç ç ç ç ç
z
If "Din Unlock" and "C71" appear in the display
Make sure the optical cable or the coaxial digital
connecting cable is connected properly.
Connecting a control A1 cable to the CD changer
and MD deck
This lets you perform CD synchro-recording and
operate the CD changer using the controls on the MD
deck or the supplied remote (Mega CD Control
Function). Be sure to make connections firmly.
If a component has more than one CONTROL A1 jack,
you can use either one.
MD deck
S-LINK
CONTROL A1
Ç
You can connect the cable
to either of the jacks
: Signal flow
ç ç ç ç ç
Notes
• When the deck controls the CD changer with a mode
selector, set the selector to CD1.
• If the plugs are not inserted firmly, "No Connect" appears
in the display and you cannot use the Mega CD Control
Function.
Controlling a Separately Available Sony CD Changer
Controlling a CD Changer from
CD changer
the MD Deck (Mega CD Control
DIGITAL
COAXIAL
Function)
OUT
You can operate a Sony CD changer connected with a
control A1 cable using the controls on the MD deck or
the supplied remote.
CD changer
S-LINK
CONTROL A1
1
2
3
4
5
MEGA CONTROL
≠ AMS ±
indicator
g
INPUT MEGA CONTROL
OPEN/CLOSE
§
MENU/NO YES
DISPLAY SCROLL TIME D.O BIT FILTER
PLAY MODE DATE
CONTINUE SHUFFLE PROGRAM RECORDED PRESENT
A B C D E
1 2 3 4 5
F G H I J
6 7 8 9 10
K L M N O
11 12 13 14 15
P Q R S T
16 17 18 19 20
U V W X Y
21 22 23 24 25
Z – . ,
>25 REPEAT A˜B A.SPACE M.SCAN
/ > 25 ? ! ( )
WRITE CLEAR P.HOLD
NAME CHAR NUM
Turn on the amplifier and set the source selector
to CD.
Set INPUT on the deck to the digital input
connector to which the CD changer is connected.
Press MEGA CONTROL.
The MEGA CONTROL indicator lights up and the
deck is set to Mega CD Control mode.
Press MENU/NO.
The current CD disc number starts flashing in the
display.
Turn AMS until the disc number you want
appears, then press AMS (or press the number
buttons and/or >25).
The track number starts flashing.
MENU/NO
0 )
§ (
P p r
Number
buttons
(Continued)
37 EN