Playing Back With Different Tones (Digital Filter) - Sony MiniDisc Deck MDS-JA20ES Mode D'emploi

Playing Back With Different
Tones (Digital Filter)
This deck is equipped with the V.C. (Variable
Coefficient) filters to allow you adjust the tone to
match your audio system, listening environment, and
the source being played back.
Note
The digital filters are effective only on the analog signals
output from the LINE(ANALOG) OUT jacks and the
PHONES jack.
FILTER indicator
g
FILTER
1
Press FILTER.
The currently selected filter appears in the display.
2
Press FILTER repeatedly to select the filter that
you want.
Each press of the button changes the filter as
follows:
n DF:Standard n DF:Spline* n DF:Plain n DF:Analog
* European model only
The FILTER indicator turns on when a setting
other than "Standard" is selected in DF (digital
filter) display.
z
You can select the filter using the remote
Press FILTER repeatedly until the filter that you want
appears in the display.
z
What is a V.C. (Variable Coefficient) filter?
A variable coefficient filter changes the sound
characteristics of a signal by applying specific frequency
cut-off conditions. Such filters are provided on digital
devices such as CD players and MD decks to remove
aliasing noise. Your deck comes with four or three
types of digital filters. A brief description is given
below of the sound characteristics of each filter.
Standard
This filter produces an expansive sound of wide range.
Spline (European model only)
This filter produces a sound that is clearly positioned
and smooth.
Plain
This filter produces a fresh and powerful sound.
Analog
0 )
This filter produces a resonant and mellow sound.
§ (
P p r
Note
The change in sound characteristics caused by digital filters
occur mainly in the inaudible range, not the audible range as
in the case of an amplifier.
Playing MDs
35 EN