Sony MEX-GS820BT Mode D'emploi page 44

Mounting the unit in the
dashboard
• Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
• For Japanese cars, see "Mounting the unit
in a Japanese car" (page 44).
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The
heatsink on the left side of the unit
remains hot right after use.
1
Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2
Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
44
GB
in).
182 mm (7 1 / in)
4
1 / in)
8
Catch

Mounting the unit in a Japanese car
You may not be able to install this unit in
some makes of Japanese cars. In such a
case, consult your Sony dealer.
TOYOTA

to dashboard/center console
Bracket
Existing parts supplied
with your car
NISSAN

to dashboard/center console
Bracket
Existing parts supplied
with your car
Note
To prevent malfunction, install only with the
supplied screws .
Bracket

Bracket
