Sony VPL-SW630C Guide De Référence Rapide page 48

Selecting the Menu Language
The factory setting for the language for displaying menus, messages, etc. is English.
To change the on-screen language, proceed as follows:
1
Plug in the AC power cord into a wall
outlet.
2
Turn on the projector.
/
Press the ? 1 key.
3
Press the MENU key to display the
menu.
If the display cannot be properly seen,
adjust the focus, size, and position of the
projected image
4
Select the menu language.
Press the V or v key to select the
1
Operation (
the ENTER key.
Press the V or v key to select
2
"Language (
ENTER key.
12
GB
Selecting the Menu Language
3
2
(page 17)
.
) menu then press
)" then press the
1
Operation
Language
Status
Security Lock
Control Key Lock
Sel Set
Press the V/v/B/b key to select a
3
language, then press the ENTER
key.
5
Press the MENU key to turn off the
menu screen.
English
OnStatus OnStatus
Off
Off
Back