Inserting The Dust Container And Filter - Dirt Devil Spider Mode D'emploi

M607.book Seite 48 Dienstag, 18. Juni 2013 10:44 10
8 After use

8.4 Inserting the dust container and filter

33
34
35
36
48
When you want to reinsert the dust container
together with the filter, proceed as follows:
1. Ensure that the appliance is switched off
(On/Off switch in the "0" position).
2. Put the dust container with inserted filter
back into the dust container compartment
(Fig. 33).
3. Forcefully fit the dust container cover back
on (Fig. 34). It will audibly click into place.
4. First, fit on the cover of the dust container
compartment so that the 3 tabs on the
cover engage in the 3 slots in the dust
container cover provided for this purpose
(Fig. 35).
5. Then press on the back of the cover of the
dust container compartment (Fig. 36). It
will tangibly and audibly snap into place.
NOTE:
The appliance can only be switched on if
the cover is correctly fitted on.
NOTE:
If you have taken off the cover when the
appliance is switched on, you must switch
the appliance off and then switch it on
again. The appliance will then start up.