Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3 After use
3.1 Switching off
1
2
8
3.2 Transporting
1
9
3.3 Parking and storage
A
B
10
3.4 Emptying and cleaning the dust container
A
1
11
1
12
12
3
After use
1. Switch off the vacuum cleaner with the on/off switch with integrated power control (Fig. 8/1) and pull the
plug from the mains socket.
2. Keep the plug in your hand.
WARNING:
Danger of injury! During uncontrolled retraction the power cord can whip around, become an obstacle or
overthrow objects. Therefore keep the plug in your hand and guide it during retraction of the power cord.
3. To retract the power cord operate the carrying-handle with integrated cable retraction button (Fig. 8/2).
„
Only carry the vacuum cleaner by its carrying-handle (Fig. 9/1).
ATTENTION:
Do not carry the appliance by the handle of the dust container. You might accidentally push the release
buttons (Fig. 1/30), causing the vacuum cleaner to drop.
„
To park the appliance when interrupting work you can hook the floor nozzle's parking-hook into the parking-
1
bracket (Fig. 10/A).
„
To store the appliance you can hook the telescopic tube's storage hook onto the storage bracket (Fig. 10/
B). We recommend to first push the telescopic tube together by pressing the release catch (Fig. 10/B1).
ATTENTION:
Never store the appliance next to heat sources (e.g. stoves or radiators). Avoid exposing it to direct sunlight.
Heat can damage the appliance.
„
Before storing the appliance for a prolonged time empty the dust container Zchapter 3.4, „Emptying and
cleaning the dust container"and dispose of its contents properly.
„
Always store the appliance in a cool, dry place and out of reach of children.
„
Empty the dust container after each vacuuming session, but at the latest when the "MAX" mark (Fig. 11/2
3
has been reached or the cleaning indicator (Fig. 11/A3) lights up.
ATTENTION:
Switch off the appliance before emptying the dust container. This will prevent dust from damaging the
appliance.
1. Push both release buttons simultaneously (Fig. 11/1).
2. Remove the dust container by pulling it upwards out of its receptacle.
3. Empty the dust container by holding it low over a dustbin and only then push the release catch of the bottom
2
plate (Fig. 12/1).
NOTE:
You can dispose of the contents of the dust container with your regular domestic waste as long as it does not
contain any substances not permitted in domestic waste.
4. Remove any residual dust from the dust container using a dry cloth or a soft brush, e. g. the supplied
furniture brush.
5. Close the dust compartment bottom plate.
6. Also clean the filters on this occasion. Clean these if necessary, Zchapter 4.2, „Checking and cleaning the
cyclone", Zchapter 4.3, „Cleaning / changing the laminar motor protection filter" or Zchapter 4.4, „Cleaning
/ changing the exhaust filter".
7. Put the dust container back into its holder. You must feel and hear it clicking into place.
Publicité
Table des Matières
