Product Description; Designations Of The Components Shown (Figure A - F); Technical Data - ABNOX AXDV-C1 Instructions De Service

EN
• Deficient monitoring of the machine parts that are
subject to wear.
• Improperly completed repairs or use of third-party
components.

Product Description

Intended Use
The dosing valve is designed for volumetric dosing of
non-abrasive lubricants.
Labelling
The dosing valve is labelling in accord with the type
key (Figure E) .
Function
The pneumatic part of the dosing valve (Figure F)
is controlled using compressed air via an external
pneumatic 5/2-way valve or the attached handle.
This initialises the dosing in the hydraulic component
to the extent that the dosing valve is attached to an
active pump. The duration of dosing depends on the
setting for the medium pressure.
20
Designations of the components
shown (Figure A – F)
1 Medium outlet
2 Connection block
3 Medium inlet
4 Adjustment screw
5 Pneumatic connections
6 Dosing screw
7 Dosing trigger rod valve
8 Dosing trigger PN- valve
9 Mounting bracket
10 Dosing trigger handle
11 Mounting hook
12 Magnetic field sensor (optional)

Technical Data

Model AXDV-C1
Dosing range (cm ) 0.001-0.020
3
Min. / max. pneumatic 5.0 / 7.0
operating pressure (bar)
Min. / max. 20 / 200
working pressure (bar)
Connection medium outlet M5 incl. dosing
(No. 1) needle adapter
Fastening thread 3 x M4x6
(No. 2)
Connection medium inlet G1/8" *
(No. 3)
Used medium-specification Lubricants
NLGI 0 - NLGI 3
* Except AXDV-C-PEN:
Connection medium input = female thread M8x1 with pre-assembled connector
Model AXDV-C1-LP
Dosing range (cm 3 ) 0.003-0.020
Min. / max. pneumatic 5.0 / 7.0
operating pressure (bar)
Min. / max. 5 / 20
working pressure (bar)
Connection medium outlet M5 incl. dosing
(No. 1) needle adapter
Fastening thread 3 x M4x6
(No. 2)
Connection medium inlet G1/8" *
(No. 3)
Used medium-specification oils
* Except AXDV-C-PEN-LP:
Connection medium input = female thread M8x1 with pre-assembled connector
AXDV-C2 AXDV-C3 AXDV-C4
0.010 – 0.200 0.10 – 2.00 1.00 – 6.00
5.0 / 7.0 5.0 / 7.0 5.0 / 7.0
20 / 200 20 / 200 20 / 200
M5 incl. dosing G1/8" G1/8"
needle adapter
3 x M4x6 2 x M4x6 2 x M4x6
G1/8" * G1/4" G1/4"
Lubricants Lubricants Lubricants
NLGI 0 - NLGI 3 NLGI 0 - NLGI 3 NLGI 0 - NLGI 3
AXDV-C2-LP AXDV-C3-LP AXDV-C4-LP
0.010 – 0.200 0.10 – 2.00 1.00 – 6.00
5.0 / 7.0 5.0 / 7.0 5.0 / 7.0
5 / 20 5 / 20 5 / 20
M5 incl. dosing G1/8" G1/8"
needle adapter
3 x M4x6 2 x M4x6 2 x M4x6
G1/8" * G1/4" G1/4"
oils oils oils
21