Product Description; Technical Data; Designations Of The Components Shown (Figure A - F) - ABNOX AXDV-C1 Instructions De Service

EN
• Deficient monitoring of the machine parts that are
subject to wear.
• Improperly completed repairs or use of third-party
components.

Product Description

Intended Use
The dosing valve is designed for volumetric dosing of
non-abrasive lubricants.
Labelling
The dosing valve is labelling in accord with the type
key (Figure E) .
Function
The pneumatic part of the dosing valve (Figure F)
is controlled using compressed air via an external
pneumatic 5/2-way valve or the attached handle.
This initialises the dosing in the hydraulic component
to the extent that the dosing valve is attached to an
active pump. The duration of dosing depends on the
setting for the medium pressure.

Technical Data

Model
Dosing range (cm )
3
Min. / max. pneumatic
operating pressure (bar)
Min. / max.
working pressure (bar)
Connection medium outlet
(No. 1)
Fastening thread
(No. 2)
Connection medium inlet
(No. 3)
Used medium-specification
* Except AXDV-C-PEN:
Connection medium input = female thread M8x1 with pre-assembled connector
18
Designations of the components
shown (Figure A – F)
1
2
3
4
5
6
7
8
9
10
11
12
AXDV-C1 AXDV-C2
0.001-0.020 0.010 – 0.200
5.0 / 7.0 5.0 / 7.0
20 / 200 20 / 200
M5 incl. dosing M5 incl. dosing
needle adapter needle adapter
3 x M4x6 3 x M4x6
G1/8" * G1/8" *
Lubricants Lubricants
NLGI 0 - NLGI 3 NLGI 0 - NLGI 3
Medium outlet
Connection block
Medium inlet
Adjustment screw
Pneumatic connections
Dosing screw
Dosing trigger rod valve
Dosing trigger PN- valve
Mounting bracket
Dosing trigger handle
Mounting hook
Magnetic field sensor (optional)
AXDV-C3
0.10 – 2.00
5.0 / 7.0
20 / 200
G1/8"
2 x M4x6
G1/4"
Lubricants
NLGI 0 - NLGI 3
AXDV-C4
1.00 – 6.00
5.0 / 7.0
20 / 200
G1/8"
2 x M4x6
G1/4"
Lubricants
NLGI 0 - NLGI 3