JVC KD-R985BTS Manuel D'instructions page 19

BLUETOOTH®
Auto Pairing
When you connect the following devices to
the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
KD-R985BTS/KD-R885BTS/KD-RD98BTS/KD-RD88BT:
iPhone/iPod touch/Android device
KD-R780BT: Android device
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is
turned on.
– [AUTO PAIRING] is set to [ON]. ( 18)
– JVC MUSIC PLAY application is installed on
the Android device ( 7) and [AUTO MODE] is
selected ( 8).
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• KD-R985BTS/KD-RD98BTS:
The buttons will blink in the color you have selected in [RING COLOR]. ( 16)
KD-R885BTS/KD-R780BT/KD-RD88BT:
The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 16)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 16)
During a call:
• KD-R985BTS/KD-RD98BTS:
The buttons stop blinking and illuminate in the color you have selected in [RING COLOR]. ( 16)
KD-R885BTS/KD-R780BT/KD-RD88BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To On the faceplate
First incoming call...
Answer a call Press
Reject a call
Press and hold
volume knob.
End a call
Press and hold
volume knob.
On the remote control
or the volume knob. Press
or the Press and hold
or the Press and hold
.
.
.
15
ENGLISH