Siriusxm® Radio; (For Kd-R985Bts/Kd-R885Bts/Kd-Rd98Bts) - JVC KD-R985BTS Manuel D'instructions

SiriusXM® Radio
Only SiriusXM® brings you more of what you love
to listen to, all in one place. Get over 140 channels,
including commercial-free music plus the best sports,
news, talk, comedy and entertainment. Welcome to the
world of satellite radio. A SiriusXM Vehicle Tuner and
Subscription are required. For more information, visit
<www.siriusxm.com>.
Preparation:
1
Connect the optional SiriusXM Vehicle Tuner
(commercially available).
Expansion port on
the rear panel
2 Check your Radio ID for activation.
The SiriusXM Radio ID is required for activation and
can be found by tuning to Channel 0 as well as on
the label found on the SiriusXM Vehicle Tuner and
its packaging.
The Radio ID does not include the letters I, O, S or F.
3 Activate the subscription.
For users in the U.S.A.:
Online: Go to <www.siriusxm.com>
Phone: Call 1-866-635-2349
For users in Canada:
Online: Go to <www.siriusxm.ca/activatexm>
Phone: Call 1-877-438-9677
4
Press repeatedly to select SIRIUS XM
to start updating.

(for KD-R985BTS/KD-R885BTS/KD-RD98BTS)

Start listening
1
2
3
4
5
Antenna
If a locked channel or a mature channel is selected, a pass code input screen appears.
Enter the pass code to receive the channel. ( 13)
Settings in memory
SiriusXM Vehicle Tuner
You can store up to 18 channels.
While listening to a channel....
Press and hold one of the number buttons (1 to 6).
1
2
Press one of the number buttons (1 to 6).
1
2
3
Press
Press repeatedly to select SIRIUS XM.
Press .
" " lights up.
Turn the volume knob to select a CATEGORY, then press the knob.
Turn the volume knob to select a category from the list, then press the knob.
If "ALL CHANNELS" is selected, all the available channels will be shown.
Turn the volume knob to select a channel, then press the knob.
(or)
Press to search for a channel manually.
• Pressing and holding
Store a channel
(or)
Press and hold the volume knob until "PRESET MODE" flashes.
Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and "MEMORY" appears.
Select a stored channel
(or)
Press .
Turn the volume knob to select PRESET, then press the knob.
Turn the volume knob to select a preset number, then press the knob.
(or)
on the remote control.
changes the channel rapidly.
11
ENGLISH