Controls - John Bean T1545 Manuel D'utilisation

F
A
B
4.1-1
D
4.1-2
T1545T
E
D
C
D
4.1-3

4.1 Controls

Before operating the machine ensure that you have well
understood the operation and function of all the controls
(Fig. 4.1-1).
A.
· Press down and release, WITH LEFT FOOT, the fi rst
pedal from the left: the clamps of the turntable will
retract. Do it again: the clamps will expand. If you press
the pedal prior to the end of the stroke and release,
the clamps may be stopped in any position.
B.
· Open the bead breaker arm. Press down and hold,
WITH LEFT FOOT, the second pedal from the left: by
doing this you operate the bead breaker blade and
the arm will move towards the machine. Release the
pedal: the bead breaker blade will retract.
C.
· Press down and hold, WITH RIGHT FOOT, the fi rst
pedal from the right: the turntable turns clockwise. Lift
the pedal and the turntable turns counter-clockwise.
DANGER OF LEG TRAPPING
D.
· The lock handle enable the mount/demount tool to be
locked in the working position. Lower the lock handle
to unlock (Fig. 4.1-2) the vertical slide, lift the handle
to lock (Fig. 4.1-3).
E.
· Turn the adjustment knob (1, Fig. Fig. 4.1-1) for
positioning mount/demount head according to rim
diameter.
For machines without Tubeless wheel system:
F.
· Press bead seater/infl ator pedal on left side of the
machine (2, Fig. Fig. 4.1-1): air will come from infl ation
hose end only.
W H E N O P E R AT I N G T H E I N F L AT O R I T I S
MANDATORY TO WEAR EAR PROTECTORS AND
SAFETY GLASSES TO PREVENT CONTAMINATION
FROM NOISE, DUST AND CHIPS BLOWN BY THE
AIR JETS.
15
EN -