Table des Matières
Publicité
OBJ_BUCH-2940-001.book Page 10 Tuesday, August 16, 2016 10:32 AM
10 | English
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol
Meaning
EasyDrill 12-2: Cordless Drill Driver
Grey-marked area: Handle (insulated
gripping surface)
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Movement direction
Reaction direction
Right/left rotation
Drilling
Low speed
High speed
Switching On
Switching Off
U
Rated voltage
n
1
No-load speed (1. gear)
0
n
2
No-load speed (2. gear)
0
M
Maximum torque according to ISO 5393
Metal
1 609 92A 32K | (16.8.16)
Symbol
Meaning
Wood
Ø
Drilling diameter, max.
Ø
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01:2014
L
Sound power level
wA
L
Sound pressure level
pA
K
Uncertainty
a
Vibration total value
h
T
Permitted ambient temperature during
1
charging
T
Permitted ambient temperature during
2
operation* and storage
* limited performance at temperatures
<0 °C
Recommended batteries
Recommended chargers
Delivery Scope
Cordless Drill/Driver.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Technical Data
The technical data of the machine are listed in the table on
page 143.
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 143.
Sound emission values determined according to
EN 60745-2-1, EN 60745-2-2.
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-1, EN 60745-2-2.
Bosch Power Tools
Publicité
Table des Matières
