Sony CDX-GT350S Mode D'emploi page 7

H GP*
2 /ALBM* 3 +/– buttons*
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
I SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
J DSPL (display) button 8
To change display items.
K SENS button
To improve weak reception: LOCAL/
MONO.
L SOURCE button
To power on; change the source (Radio/CD/
MD* 5 /AUX/SAT* 1
M MODE button 8, 10
To select the radio band (FM/AM)/select the
SAT tuner band (mode)*
N SCRL (scroll) button 8
To scroll the display item.
O Number buttons
CD/MD* 5 :
(3): REP 8
(4): SHUF 8
(5): BBE MP*
7 3
To activate the BBE MP function, set
"BBEMP-ON." To cancel, set
"BBEMP-OFF."
(6): PAUSE*
7
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
P EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
Q AUX input jack 10
To connect a portable audio device.
R RESET button 4
S Z (eject) button 5
To eject the disc.
4
).
1 /select the unit* 6 .
T Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
ws VOL (volume) +/– button
To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf SEL (select) button
The same as the select button on the unit.
wg M (+)/m (–) buttons
To control CD, the same as
(GP/ALBM) +/– on the unit.
wh Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When the SAT tuner is connected.
*2 When an ATRAC CD is played.
*3 When an MP3/WMA is played.
*4 If the changer is connected, the operation is
different, see page 10.
*5 When an MD changer is connected.
*6 When a CD/MD changer is connected.
*7 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 13.
7