Sony SHAKE-X30 Mode D'emploi page 22

2
Press / repeatedly to select
"BIT RATE", then press
3
Press / repeatedly to select
the bit rate you want, then press
.
"128 KBPS": encoded MP3 files
• •
have smaller file size and lower
audio quality.
"256 KBPS": encoded MP3 files
• •
have bigger file size but higher
audio quality.
To exit the options menu, press
OPTIONS.
Transferring music from a disc
You can transfer music to a USB
device connected to
as follows:
Synchronized Transfer: Transfer
• •
all tracks or MP3 files from a disc
to USB.
REC1 Transfer: Transfer a single
• •
track or MP3 file during playback.
Use the buttons on the unit to
perform this operation.
1
Connect a transferable USB
device to the
Note
You can use a USB adaptor (not
supplied) to connect the USB device
to the unit if the USB device cannot be
plugged into the
2
Press FUNCTION repeatedly to
select "CD" then load a disc.
22
US
.
(USB) port
(USB) port.
(USB) port.
3
Prepare the sound source.
Synchronized Transfer:
If the system starts playback
automatically, press  twice to stop
the playback fully.
When playback is stopped, press
PLAY MODE on the remote control
repeatedly to select the play mode
you want.
Note
If you start transferring in Shuffle Play
or Repeat Play, the selected play mode
changes to Normal Play automatically.
REC1 Transfer:
Select the track or MP3 file you want
to transfer, then start playback.
4
Press REC TO USB.
"PUSH ENTER" appears on the
display.
5
Press ENTER.
The transfer starts, then "DO NOT
REMOVE" appears on the display.
Do not remove the USB device until
the transfer is complete.
When the transfer is complete, the
system performs as follows:
Synchronized Transfer:
The disc stops automatically.
REC1 Transfer:
The disc continues to play the next
track or file.
To stop transfer
Press .
Notes on transfer
While transferring, no sound is output.
• •
CD-TEXT information is not transferred
• •
to the created MP3 files.