Creating A Party Atmosphere (Dj Effect) - Sony SHAKE-X30 Mode D'emploi

4
Repeat step 3 to adjust the level
of other frequency bands and
surround effect.
To exit the options menu, press
OPTIONS.
To select the custom equalizer
setting
Press SOUND FIELD repeatedly to
select "CUSTOM EQ".
Creating a party
atmosphere (DJ Effect)
Use the buttons on the unit to
perform this operation.
1
Press the following button to
select the effect type.
FLANGER: Creates a deep flanging
• •
effect that is similar to the roar of
a jet plane.
ISOLATOR: Isolates a specific
• •
frequency band by adjusting the
other frequency bands. For
example, when you want to focus
on vocals.
SAMPLER: Provides a series of
• •
special sound effects.
2
Change the sound effect.
For FLANGER and ISOLATOR:
Turn the VOLUME/DJ CONTROL
knob to adjust the effect level.
For SAMPLER:
Press SAMPLER repeatedly to select
the SAMPLER mode you want, then
press S1, S2, S3 or S4 to output the
SAMPLER sound effect.
To output other SAMPLER sound
effect continuously, turn the
VOLUME/DJ CONTROL knob.
To turn off the effect
Press DJ OFF.
• •
Press the selected effect button
• •
again (for FLANGER and ISOLATOR
only).
Note
The DJ Effect is automatically turned off
• •
when you:
— turn off the system.
— change the function.
— activate or deactivate the PARTY
CHAIN function.
— change sound effect.
— use the Vocal Fader.
— change the key (Key Control).
If you activate the DJ Effect during
• •
transferring, the sound effect will not be
transferred onto the USB device.
You cannot use VOLUME/DJ CONTROL
• •
knob on the unit to adjust the volume
when the DJ Effect is activated.
Press VOL +/– on the remote control to
adjust the volume.
33
US