Sony SHAKE-X30 Mode D'emploi page 16

 Speakers
PARTY LIGHT L/R terminals
• •
Connect the Party Light connector of the speaker to this terminal. The
lighting on the speakers will react according to the music source. You can
select the Party Light and Speaker Light according to your preference
(page 39).
SPEAKERS L/R terminals
• •
Connect the speaker connector of the speaker to this terminal.
Note
Be sure to use only the supplied speakers.
• •
When connecting speaker cables, insert the connector straight into the terminals.
• •
 AC power cord (mains lead)
Connect the AC power cord (mains lead) (supplied) to the unit, then plug it
into a wall outlet.
A small space is left between the plug and the unit even when the AC
power cord (mains lead) is inserted firmly. The cord is supposed be
connected this way. This is not a malfunction.
When the AC power cord (mains lead) is connected, the demonstration
(page 19) starts automatically. If you press  (power) to turn on the
system, the demonstration ends.
16
US
AC power cord
(mains lead)
(supplied)
To the wall outlet