Starting The "Water Filter"Or "Frost Protection" Programme - Siemens EQ.9 plus connect s700 Mode D'emploi

en Menu settings
Bean container
Settings marked with * can also be selected directly in the menu.
--------
Starting the "Water filter"or
"frost protection" programme
Briefly press the $/± button.
1.
2. The rotary selector can be used to
select the "Water filter" or "frost
protection" programme. The current
setting is marked on the display.
Note:
The rotary selector can also be
used to select a service programme.
~ "Service programmes" on page 75
Water filter
A water filter lessens limescale deposits
and reduces impurities in the water. The
appliance also does not need to be
descaled so often. Water filters are
available from retailers or from
customer service. ~ "Accessories"
on page 51
If a water filter is inserted, the appliance
will show when it needs to be changed.
The display shows the relevant prompt.
Inserting or replacing a water filter
A new water filter must be rinsed before
it can be used.
1. Select "Water filter" in the Settings
menu.
66
Setting that determines which bean container is automatically active.
The bean container can be selected directly before each dispensing operation
using the "Bean container" selection buttons.
most recently selected
■
bean container
default bean container
■
right
default bean container left Each time a beverage is dispensed, the appli-
■
Save container with bever-
■
age
The appliance remembers the most recently
used bean container.
Each time a beverage is dispensed, the appli-
ance automatically returns to the right-hand
bean container.
ance automatically returns to the left-hand bean
container.
The appliance remembers the most recently
used bean container and the most recently set
beverage.
Use the navigation button to select
2.
"insert" or "replace".
3. Use the measuring spoon to press
the water filter firmly into the empty
water tank.
Fill the water tank with water up to
4.
the "max" marking.
5. Place a container with a capacity of
at least 1.0 l under the outlet and
confirm.
Water will now flow through the filter.
The filter is rinsed.
Then empty the container.
6.
The appliance is ready for use again.