Starting The "Water Filter"Or "Frost Protection" Programme - Siemens TI955 Série Mode D'emploi

Select usermode
Beverage info
Factory settings
Demo mode
Beverage settings
Cappuccino
sequence
Espresso Mac-
chiato sequence
Latte Macchiato
pause
Espresso / Cof-
fee temperature*
User profiles
Cup warmer*
Settings marked with * can also be selected directly in the menu.
--------
Starting the "Water filter"or
"frost protection" programme
Briefly press the $/± button.
1.
2. The rotary selector can be used to
select the "Water filter" or "frost
protection" programme. The current
setting is marked on the display.
default mode
■
barista mode
■
Shows the volume of drinks dispensed since the appliance was commissioned.
For technical reasons, the counter does not represent a precise number of cups.
Appliance reset to factory set-
tings
on
■
off
■
first milk
■
first coffee
■
first milk
■
first coffee
■
min
■
5s
■
10s
■
normal
■
high
■
max.
■
Leave profiles automati-
■
cally
Delete all profiles
■
on
■
off
■
In the "barista mode" setting, the following can
be performed directly in the display:
The temperature can be set by pressing the
■
left navigation button.
The aromaIntense (brew speed) can be set
■
in three levels by pressing the right naviga-
tion button.
Resets all your own settings to the condition
when delivered.
For presentation purposes only. The setting "off"
must be activated for normal operation. The set-
ting is only possible in the first 3 minutes after
switching on the appliance.
Setting that determines whether milk or coffee
should be brewed and dispensed first.
Setting that determines whether milk or coffee
should be brewed and dispensed first.
Setting the pause between milk and coffee dis-
pensing.
Setting the temperature for coffee drinks.
The setting is effective for all preparation types.
Applies only to "default mode" -in "barista mode"
directly adjustable via drink selection.
~ "Adjusting beverage settings" on page 19
Setting that determines whether user profiles
are to be exited automatically or deletion of all
user profiles.
If the cup warmer is switched on, the cup
warmer LED lights up.
Note: The rotary selector can also be
used to select a service programme.
~ "Service programmes" on page 30
Menu settings en
25