Starting The "Water Filter"Or "Frost Protection" Programme - Siemens TI90 HC Série Mode D'emploi

Child-proof lock
--------
Starting the "Water filter"or
"frost protection" programme
Briefly press the $/±button.
1.
The rotary selector can be used to
2.
select the "Water filter" or "frost
protection" programme. The current
setting is marked on the display.
The rotary selector can also be
Note:
used to select a service programme.
~ "Service programmes" on page 74
Water filter
A water filter lessens limescale
deposits, reduces impurities in water
and improves the taste of the coffee.
Water filters are available from retailers
or from customer service.
~ "Accessories" on page 51
Default container left
■
Most recently selected
■
bean container
Save container with bever-
■
age
activate
■
Child-proof lock activated
■
To switch off, press milk
Each time a beverage is dispensed, the appli-
ance automatically returns to the left bean con-
tainer.
The appliance memorises the most recently
used bean container.
The appliance memorises the most recently
used bean container and the most recently set
beverage.
Setting that governs whether the child-proof
lock is activated or deactivated. ~ "Childproof
lock" on page 62
Inserting or replacing a water filter
A new water filter must be rinsed before
it can be used.
Select "Water filter" in the menu
1.
settings.
Use the navigation button to select
2.
"insert" or "replace".
Use the measuring spoon to press
3.
the water filter firmly into the empty
water tank.
Fill the water tank with water up to
4.
the "max" marking.
Place a container with a capacity of
5.
at least 1.0 l under the outlet and
confirm.
Water will now flow through the filter.
The filter is rinsed.
Subsequently empty the container.
6.
The appliance is ready for use again.
Menu settings en
65