Customising; Creating A User Profile; Editing Or Deleting User Profile - Siemens TI90 HC Série Mode D'emploi

P

Customising

U ser profiles can be created in the
C u s t o m i s i n g
customising menu. In the user profiles,
individual beverages can be stored
under names of your choice.

Creating a user profile

Press the ! button. The menu
1.
appears.
Use the rotary selector to select a
2.
new profile.
Press the right-hand navigation
3.
button to confirm the selection.
The user name can be entered.
Use the rotary selector to select the
4.
desired letters. Press the rotary
selector to confirm the letters.
The letter is saved.
Once the user name has been fully
entered:
Press the right-hand navigation
5.
button to save the user name.
Use the rotary selector to select a
6.
background picture.
Press the right-hand navigation
7.
button to confirm the selection.
Use the rotary selector to select
8.
"default mode" or "barista mode".
Press the right-hand navigation
9.
button to confirm the selection.
The selection prompt appears.
Press the right-hand navigation
10.
button again to save the profile.
The user profile picture appears.
An individual beverage can then be
saved immediately for the user created.
Saving individual beverages:
Press the rotary selector.
1.
The display "change beverages"
appears.
Press the right-hand navigation
2.
button to create the beverage.
Use the rotary selector to select the
3.
desired beverage.
The selected beverage can be adjusted
in line with personal preference.
~ "Adjusting beverage settings"
on page 58
Press the rotary selector.
4.
A prompt appears for you to confirm
the selection.
Press the right-hand navigation
5.
button to confirm the selection.
Press the ! button.
6.
The settings are completed.
The appliance is ready for use again.
Up to 10 profiles can be saved.
Note:

Editing or deleting user profile

Press the ! button. The menu
1.
appears.
Use the rotary selector to select the
2.
desired profile.
Press the left navigation button to
3.
delete the profile.
- or -
Press the right navigation button to
edit the settings in the profile.
The settings in the profile can be
changed as described. ~ "Creating a
user profile" on page 61
Press the ! button.
4.
The appliance is ready for use again.
Customising en
61