Adjusting Beverage Settings - Siemens EQ.9 plus connect s700 Mode D'emploi

Adjusting beverage settings

Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
Button Function
Selecting coffee strength,
"
ground coffee
Milk/coffee mixing ratio
milk
Cup size
ml
Two cups at once
#
Navigation Water Temperature*
button, left
Navigation aromaIntense*
button, right
Selection marked with * is only available for certain drinks or when in "barista mode".
The appliance is set to "barista mode"
by default. Additional values can
therefore be set using the two
navigation buttons. "Barista mode" can
also be switched off. ~ "Menu
settings" on page 64
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Selection
very mild *
■
mild
■
mild +*
■
normal
■
normal +*
■
strong
■
strong +*
■
very strong
■
very strong +*
■
extra strong
■
Setting share of milk in %
(only for coffee drinks with milk)
Adjustment of volume in ml increments.
Not available for Ristretto.
Place two cups under the outlet.
e.g. for tea drinks:
> 60°C (special tea prepa-
■
ration)
> 70°C (white tea)
■
normal
■
intense
■
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
Press the " button.
1.
Use the rotary selector to set the
2.
coffee strength or select ground
coffee.
Press the " button or the rotary
3.
selector to confirm.
Operating the appliance en
doubleShot strong
■
doubleShot strong +
■
doubleShot strong ++*
■
TripleShot strong *
■
TripleShot strong +*
■
Ground coffee
■
> 80°C (green tea)
■
> 85°C (rooibos tea)
■
> 90°C (black tea)
■
> 97°C (fruit tea)
■
intense +
■
59