Operating The Appliance; Selecting A Drink - Siemens TI 903 Serie Mode D'emploi

Use the handle to remove the water
2.
tank.
Insert the water filter. ~ "Inserting
3.
or replacing a water filter"
on page 49
The water filter is not included
Note:
in product package.
~ "Accessories" on page 39
Fill the water tank with water up to
4.
the "max" marking.
Re-insert the water tank into the
5.
holder and tilt back to the starting
position.
The brand logo lights up in the display.
The appliance heats up and rinses.
Some water will run out of the outlet
system.
The appliance is ready for use when the
symbols for the beverages and the
on/off button light up on the display.
Operating the appliance en
1
Operating the
appliance
In this section, you will learn how to
p l i a n c e O p e r a t i n g t h e a p
prepare your appliance for beverage
preparation and how to prepare hot
drinks. It features information on
adjusting the beverage settings and
adjusting the grinding level.

Selecting a drink

Use the rotary selector to select the
■
desired drink.
The display shows the name of the
■
drink and the currently active values
(e.g. strength or cup size).
The drink selected can be prepared
■
with the pre-set values or first
adjusted to individual taste.
~ "Adjusting beverage settings"
on page 44
If no controls are activated within
■
approx. 5 seconds, the appliance
will exit settings mode. The settings
made will be automatically stored.
You can choose from the following
drinks:
Espresso Macchiato
Ristretto
Espresso
Espresso Doppio
41