Controls - Siemens TI 903 Serie Mode D'emploi

en Getting to know your appliance

Controls

Button Meaning
on/off Switches the appliance on and off
The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
it is still warm when switched on, or
■
coffee was not dispensed before the appliance was switched off.
■
The appliance is ready for use when the symbols for drink selection and the on/off button
light up on the display.
Customising
!
The appliance provides the option of saving and calling up customised settings for coffee
drinks. ~ "Customising" on page 46
Coffee strength
"
Adjusting the coffee strength. ~ "Adjusting beverage settings" on page 44
milk Briefly press:
Setting for share of milk in the drink in %
As a drink or as an ingredient in certain coffee drinks. ~ "Adjusting beverage settings"
on page 44
Press and hold for at least 4 seconds:
Child-proof lock ~ "Childproof lock" on page 47
ml Drink quantity in millilitres. ~ "Adjusting beverage settings" on page 44
Two drinks
#
Preparation of two drinks simultaneously. Position cups next to one another under the cof-
fee dispenser. ~ "Adjusting beverage settings" on page 44
Menu settings/service programmes
$/±
Briefly press the $/± button in order to call up the menu settings and service pro-
grammes. Briefly press the $/± button again to return to the drink selection. If no selec-
tion is made within approx. 10 seconds, the appliance will automatically return to the drink
selection.
Note:
directly.
Navigation buttons
For navigating in the display.
--------
Display
The display ( shows the selected
drinks, settings and setting options, as
well as messages about the appliance's
operating status.
Additional information is shown in the
display; this is hidden after a short
38
Press and hold the $/± button for at least 5 seconds to call up the menu settings
period of time or once the information is
confirmed by pressing a button.
The display also prompts the user to
perform certain actions.
The individual steps for performing the
action are shown in the display.
If the action required was carried out,
e.g. "Fill water tank", the corresponding
message will disappear.