Télécharger Imprimer la page

HP DESIGNJET T790 ePrinter Série Instructions D'assemblage page 7

Masquer les pouces Voir aussi pour DESIGNJET T790 ePrinter Série:

Publicité

17
180°
Return to the main body of the product, care-
fully turn the product upside down in order to
EN
attach the legs. You may need a third person.
Revenez sur la partie principale du produit et
retournez cette dernière avec soin afin de fixer
FR
les montants. Vous pourriez avoir besoin d'une
tierce personne.
Vuelva al cuerpo principal del producto,
con mucho cuidado gire el producto boca abajo
ES
para fijar las patas. Puede que necesite la ayuda
de otra persona.
Recoloque o corpo principal do produto e
vire-a de cabeça para baixo para prender as
PT
pernas. Pode ser necessário obter ajuda de
outra pessoa.
18
Remove the small flaps from each of the foam
end pieces.
Do not remove the foam end pieces.
Retirez les petits rabats de chacun des embouts
en mousse.
Ne retirez pas les embouts en mousse.
Retire las pequeñas solapas de cada una de las
piezas de espuma de los extremos.
No retire las piezas de espuma.
Retire as pequenas bordas de cada parte de
espuma.
Não retire as partes de espuma.
19
Remove the orange tape from the transparent
covering that protects the product.
Retirez la bande adhésive de couleur orange
du couvercle transparent qui protège le produit.
Retire la cinta naranja de la cubierta
transparente que protege el producto.
Retire a tampa laranja da cobertura
transparente que protege o produto.
20
Open the transparent covering and remove the
desiccant bag from the top of the product.
Ouvrez le couvercle transparent et retirez le
sachet déshydratant du haut du produit.
Abra la cubierta transparente y retire la bolsa
desecante de la parte superior del producto.
Abra a cobertura transparente e retire a
embalagem anti-umidade da parte superior do
produto.

Publicité

loading

Ce manuel est également adapté pour:

Designjet t1300 eprinter série