Wiring Connection; Important - Kenwood KDC-168U Mode D'emploi

INSTALLATION/CONNECTION

Wiring connection

Rear/subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
Fuse (10 A)
White
If no connections are made, do not let the wire come out from the tab.
White/Black
Gray
Brown
Gray/Black
(Mute control wire)
Green
Green/Black
Purple
Purple/Black
Blue/White
(Power control wire/
Antenna control wire)
Red
(12 V 350 mA)
(Ignition wire)
Light blue/yellow
Yellow
(Steering remote
(Battery wire)
control wire)
IMPORTANT: We recommend installing the unit with a commercially
available custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect its ground wire to the
car's chassis to avoid damaging the unit.
To the terminal that is grounded when the
telephone rings or during conversation ( 15)
(To connect the Kenwood navigation system,
refer your navigation manual.)
To the power control terminal when using the
optional power amplifier or to the antenna
control terminal in the vehicle
To the steering wheel remote control adapter
19
ENGLISH