Wiring Connection - Kenwood KDC-X797 Guide De Démarrage Rapide

Wiring connection

USB connector
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) cable which is
stereo type and does not have any resistance.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key switch
Car fuse box
(Main fuse)
Battery + –
8 | Quick Start Guide
Front output
Sub Woofer output
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Car fuse box
Red (Ignition wire)
ACC
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
FM/AM antenna input
Fuse (10A)
R L
Rear output
Wiring harness D
If no connections are made, do not let the wire come out from
the tab.
Blue/White
(Power control/ Antenna
control wire)
Brown
(Mute control wire)
Light Blue/Yellow
(Steering remote control wire)
Blue
Antenna Cord
Microphone input
Microphone H
To SiriusXM Connect Vehicle Tuner
(optional accessory)
Connect either to the power control
terminal when using the optional
P.CONT
power amplifier, or to the antenna
control terminal in the vehicle. (Max.
300mA, 12V)
To connect the Kenwood navigation
MUTE
system, consult your navigation manual.
To use the steering wheel remote
REMOTE CONT
control feature, you need to an
STEERING WHEEL
exclusive remote adapter (not supplied)
REMOTE INPUT
matches your car is required.
(Not used)
ANT. CONT