Display Settings - Kenwood KDC-168U Mode D'emploi

DISPLAY SETTINGS

Set the dimmer
Press and hold DISP (DIMMER) to turn on or off the dimmer.
• If you have set [DIMMER TIME], it will be canceled once you press and
hold this button.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
DISPLAY
DIMMER
BRIGHTNESS
TEXT SCROLL
.
Dim the illumination.
ON: Dimmer is turned on. ;
OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 6:00PM; [OFF]: 6:00AM)
1 Select a zone. (See the illustration.)
2 0 — 31: Select your preferred brightness level for the selected zone.
AUTO/ONCE: Select whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
Default: XX
13
ENGLISH