Display Settings - Kenwood KDC-X704 Mode D'emploi

Display Settings

Zone identification for color settings and brightness settings
Zone identification for brightness setting
Set the dimmer
Press and hold DISP (DIM) to turn on or off the dimmer.
• Once you press and hold this button, [DIMMER] setting (page 34) will be
overwritten.
Change the display settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
[DISPLAY]
[COLOR SELECT]
(For /
/
Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2]
separately.
1 Select a zone. (See the illustration on left column.)
2 Select a preset color for the selected zone. (Page 34)
Default:
/
: [VARIABLE SCAN]
To make your own color, select [CUSTOM R/G/B]. The color you have made
will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press S/T to select the color ([R]/[G]/[B]) to adjust.
3 Turn the volume knob to adjust the level ([0] to [9]), then press the knob.
.
/ /
)
/ /
: [INITIAL COLOR]
ENGLISH
Default: [XX]
/
/
33