Radio; Direct Access Tuning - Kenwood KDC-X704 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Radio

(for
/
• "ST" indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select RADIO.
2
Press BAND repeatedly (or press #FM+/
to select FM1/FM2/FM3/AM.
3
Press S / T (or press S / T (+) on the remote control) to
search for a station.
You can store up to 18 stations for FM and 6 stations for AM.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning

(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a station frequency.
3
Press ENT IW to search for a station.
• To cancel, press
or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
10
ENGLISH
/
/
/
AM– on the remote control)
*
/
/
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
[TUNER SETTING]
Selects the searching method for S / T buttons when pressed.
[SEEK MODE]
[AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset
station. ; [MANUAL]: Manually search for a station.
[AUTO MEMORY]
[YES]: Automatically starts memorizing 6 stations with good reception. ;
[NO]: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)
[MONO SET]
[ON]: Improves the FM reception, but the stereo effect will be lost. ;
[OFF]: Cancels.
[NEWS SET]
(For
[ON]: The unit will temporarily switch to News Programme if available. ;
[OFF]: Cancels.
[REGIONAL]
(For
[ON]: Switches to another station only in the specific region using the "AF"
control. ; [OFF]: Cancels.
[AF SET]
(For
[ON]: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; [OFF]: Cancels.
)
.
)
)
)
Default: [XX]

Publicité

Table des Matières
loading

Table des Matières